Specifications

DESPRAY’s turn-key aerosol recycling systems are available in a wide range of sizes and capacities to meet your specific needs. Although each of our recycling systems is custom-built, the following models illustrate what our systems are capable of in terms of processing volume, output, and energy consumption.

To download our specifications brochures, please click on the below:

Brochure

Technical information

Manufacturer/Filler Models

Scroll down to read more about our filler models, designed to process full cans.

Recycler Models

These models are manufactured with waste management companies, municipal services, and other recyclers in mind. Capable of processing post-consumer cans with a 25% average fill rate at a volume of between 0.5 and 5 square meters of aerosol cans per hour.  

DESPRAY 500: up to 550 cans ph

Smaller system designed for recyclers with limited space and low volume needs. DESPRAY 500 is designed to process post-consumer cans with a 25% average fill rate.

  • Volume (capacity): 0.5 m3/h 
  • Cans per hour (400ml can size): 550 
  • Typical footprint: 450×365×245 cm (15×12×8 ft)
  • Weight: 3,000 kg (6,600 lbs)
  • Power (Voltage and frequency as specified by customer): 20 kW (25 hp) 
  • Nitrogen usage (at atmospheric pressure): 1.5 m3/h 
  • Briquette weight: 2.7 – 5.5 kg (6.6 – 12 lbs)
  • Briquette dimensions: 10×10×30 cm
  • Steel recovered per hour: 50 kg (110 lbs)
  • Fluids recovered per hour: 150 kg (330 lbs)  
  • Liquid gas recovered per hour: 17 kg (37 lbs)
  • Life expectancy: With proper maintenance and upgrades, you can expect between 10 and 15 years of service from your DESPRAY system.
  • Maintenance cost: Service and maintenance costs work out to approximately $10 to $15 USD per operational hour.
  • Waste-to-energy capabilities: The BTU rating of the captured liquid gases range from 12,400 BTU to 19,900 BTU per pound. This figure depends on the mixture of propellant gases which may include propane, butane, and DME.

DESPRAY 1500: up to 1.750 cans ph

A mid-size system for recyclers with at least 33.45 m2 (360 ft2) of space and low volume requirements. DESPRAY 1500 is designed to process post-consumer cans with a 25% average fill rate.

  • Volume (capacity): 1.5 m3/h 
  • Cans per hour (400ml can size): 1,750 
  • Typical footprint: 915×365×365 cm (30×12×12 ft)
  • Weight: 9,500 kg (21,000 lbs)
  • Power (Voltage and frequency as specified by customer): 45 kW (60 hp) 
  • Nitrogen usage (at atmospheric pressure): 4.0 m3/h 
  • Briquette weight: 2.7 – 9.0 kg (6.6 – 20 lbs)
  • Briquette dimensions: 30×20×30 cm
  • Steel recovered per hour: 150 kg (330 lbs)
  • Fluids recovered per hour: 450 kg (990 lbs)  
  • Liquid gas recovered per hour: 52 kg (115 lbs)
  • Life expectancy: With proper maintenance and upgrades, you can expect between 10 and 15 years of service from your DESPRAY system.
  • Maintenance cost: Service and maintenance costs work out to approximately $10 to $15 USD per operational hour.
  • Waste-to-energy capabilities: The BTU rating of the captured liquid gases range from 12,400 BTU to 19,900 BTU per pound. This figure depends on the mixture of propellant gases which may include propane, butane, and DME.

DESPRAY 3000: up to 3.500 cans ph

A mid-size system for recyclers with at least 33.45 m2 (360 ft2) of space and higher volume requirements. DESPRAY 2500 is designed to process post-consumer cans with a 25% average fill rate.

  • Volume (capacity): 2.5 m3/h 
  • Cans per hour (400ml can size): 3,500 
  • Typical footprint: 915×365×365 cm (30×12×12 ft)
  • Weight: 12,000 kg (26,500 lbs)
  • Power (Voltage and frequency as specified by customer): 60 kW (80 hp) 
  • Nitrogen usage (at atmospheric pressure): 6.0 m3/h 
  • Briquette weight: 2.7 – 9.0 kg (6.6 – 20 lbs)  
  • Briquette dimensions: 30×20×30 cm 
  • Steel recovered per hour: 240 kg (528 lbs)
  • Fluids recovered per hour: 750 kg (1,650 lbs)  
  • Liquid gas recovered per hour: 185 kg (407 lbs)
  • Life expectancy: With proper maintenance and upgrades, you can expect between 10 and 15 years of service from your DESPRAY system.
  • Maintenance cost: Service and maintenance costs work out to approximately $10 to $15 USD per operational hour.
  • Waste-to-energy capabilities: The BTU rating of the captured liquid gases range from 12,400 BTU to 19,900 BTU per pound. This figure depends on the mixture of propellant gases which may include propane, butane, and DME.

DESPRAY 5000: up to 7.000 cans ph

A large-scale aerosol recycling system for high-volume recyclers. DESPRAY 5000 is designed to process post-consumer cans with a 25% average fill rate.

  • Volume (capacity): 5.0 m3/h 
  • Cans per hour (400ml can size): 7,000 
  • Typical footprint: 1525×365×365 cm (50×12×12 ft) 
  • Weight: 14,000 kg (30,000 lbs)
  • Power (Voltage and frequency as specified by customer): 100 kW (135hp) 
  • Nitrogen usage (at atmospheric pressure): 8.0 m3/h 
  • Briquette weight: 2.7 – 12.0 kg (6.6 – 26 lbs) 
  • Briquette dimensions: 40×30×30 cm
  • Steel recovered per hour: 480 kg (1,056 lbs)
  • Fluids recovered per hour: 1,500kg (3,300 lbs)  
  • Liquid gas recovered per hour: 370 kg (814 lbs)
  • Life expectancy: With proper maintenance and upgrades, you can expect between 10 and 15 years of service from your DESPRAY system.
  • Maintenance cost: Service and maintenance costs work out to approximately $10 to $15 USD per operational hour.
  • Waste-to-energy capabilities: The BTU rating of the captured liquid gases range from 12,400 BTU to 19,900 BTU per pound. This figure depends on the mixture of propellant gases which may include propane, butane, and DME.

Manufacturer/Filler Models

These models are designed with aerosol manufacturers/fillers in mind. Capable of processing full aerosol cans at a volume of between 1.5 and 5 square meters of cans per hour.  

For DESPRAY models designed to process post-consumer or empty cans, see our Recycler Models.

DESPRAY 1500F: up to 1.750 full cans ph

A mid-size system for manufacturers with at least 33.45 m2 (360 ft2) of space and low volume requirements. DESPRAY 1500F is designed to process full aerosol cans.

  • Volume (capacity): 1.5 m3/h 
  • Cans per hour (400ml can size): 1,750 Full cans
  • Typical footprint: 915×365×365 cm (30×12×12 ft)
  • Weight: 10,500 kg (23,150 lbs) 
  • Power (Voltage and frequency as specified by customer): 60 kW (80 hp) 
  • Nitrogen usage (at atmospheric pressure): 4.0 m3/h 
  • Briquette weight: 2.7 – 9.0 kg (6.6 – 20 lbs)  
  • Briquette dimensions: 30×20×30 cm
  • Steel recovered per hour: 150 kg (330 lbs)  
  • Fluids recovered per hour: 1,350kg (2,970 lbs)  
  • Liquid gas recovered per hour: 175 kg (262 lbs)
  • Life expectancy: With proper maintenance and upgrades, you can expect between 10 and 15 years of service from your DESPRAY system.
  • Maintenance cost: Service and maintenance costs work out to approximately $10 to $15 USD per operational hour.
  • Waste-to-energy capabilities: The BTU rating of the captured liquid gases range from 12,400 BTU to 19,900 BTU per pound. This figure depends on the mixture of propellant gases which may include propane, butane, and DME.

DESPRAY 3000F: up to 3.500 full cans ph

A mid-size system for manufacturers with at least 33.45 m2 (360 ft2) of space and higher volume requirements. DESPRAY 2500F is designed to process full cans. 

  • Volume (capacity): 2.5 m3/h 
  • Cans per hour (400ml can size): 3,500 Full cans
  • Typical footprint: 915×365×365 cm (30×12×12 ft)
  • Weight: 12.000 kg (26,500 lbs) 
  • Power (Voltage and frequency as specified by customer): 100 kW (135hp) 
  • Nitrogen usage (at atmospheric pressure): 6.0 m3/h 
  • Briquette weight: 2.7 – 9.0 kg (6.6 – 20 lbs)
  • Briquette dimensions: 30×20×30 cm
  • Steel recovered per hour: 240 kg (528 lbs)  
  • Fluids recovered per hour: 2,250 kg (4,950 lbs)  
  • Liquid gas recovered per hour: 280 kg (616 lbs)
  • Life expectancy: With proper maintenance and upgrades, you can expect between 10 and 15 years of service from your DESPRAY system.
  • Maintenance cost: Service and maintenance costs work out to approximately $10 to $15 USD per operational hour.
  • Waste-to-energy capabilities: The BTU rating of the captured liquid gases range from 12,400 BTU to 19,900 BTU per pound. This figure depends on the mixture of propellant gases which may include propane, butane, and DME.

DESPRAY 5000F: up to 7.000 full cans ph

A large-scale aerosol recycling system for high-volume manufacturers. DESPRAY 5000F is designed to process full cans.

  • Volume (capacity): 5.0 m3/h 
  • Cans per hour (400ml can size): 7,000 Full cans
  • Typical footprint: 1525×365×365 cm (50×12×12 ft)
  • Weight: 14,000 kg (33,000 lbs) 
  • Power (Voltage and frequency as specified by customer): 110 kW (150hp) 
  • Nitrogen usage (at atmospheric pressure): 8.0 m3/h 
  • Briquette weight: 2.7 – 12.0 kg (6.6 – 26 lbs)
  • Briquette dimensions: 40×30×30 cm
  • Steel recovered per hour: 480 kg (1,056 lbs)  
  • Fluids recovered per hour: 4,500 kg (9,900 lbs)  
  • Liquid gas recovered per hour: 560 kg (1,232 lbs)
  • Life expectancy: With proper maintenance and upgrades, you can expect between 10 and 15 years of service from your DESPRAY system.
  • Maintenance cost: Service and maintenance costs work out to approximately $10 to $15 USD per operational hour.
  • Waste-to-energy capabilities: The BTU rating of the captured liquid gases range from 12,400 BTU to 19,900 BTU per pound. This figure depends on the mixture of propellant gases which may include propane, butane, and DME.